You now have your squares all joined and looking great!
You will now need:
Lining Fabric – you can use what you like here – I used black drill because that’s what I had!
Iron-on Vilene – I used H640 – large enough for the rectangle
So Let’s sew Along!
1. Check that your corners are still square!
8. Now do the same across.
9. Remove the pins (leave them stored open if quilting – saves opening them again!)
10. Square up your corners and check the sides are straight – you should only need to trim a little but it is quite normal to do so.
Next is the binding!
Until next time